The ML3000 is designed and manufactured in Australia.
The ML3000 is suitable for commercial or residential use. It can either
be installed internally or externally. The lift is BCA E.3.6 compliant
to include 1100mm x 1400mm car size, Braille & tactile, light curtain
sensors and dual car controls. The ML3000 is able to travel 3 metres
per 30 seconds to a maximum height of 4 metres with a lifting capacity
of 350kg (2 people including 1 in a wheel chair).
The lift is oil hydraulic power with direct acting cylinders
on each side of the car. Fabricated from aluminium the lift tower can
be fitted into a shaft or sheeted direct to reduce installation time
and cost.
|
Manufactured
in:
|
Australia
by an Australian owned family company
|
|
Standard
Compliant:
|
AS1735
part 17
|
|
Application:
|
Commercial
or residential use
|
|
BCA
E.3.6 Complicant:
|
Car
size 100mm x 140mm, Braile & Tactile, Light |
|
Curtain
sensors and dual car controls |
|
Installation:
|
Internal
or external
|
|
|
Crane
in or dismantle
|
|
|
The
lift complete with tower can be fitted to an ower supplied shaft
or have sheeting attached directly to the tower. Cladding to be
in compliance with the lift code.
|
|
Powered:
|
Oil
Hydraulic with direct acting cylinders on each side of the lift
car
|
|
Travels:
|
2
to 3 levels with a maximum travel of 4 metres
|
|
Speed:
|
Travel
3 metres in 30 seconds
|
|
Lifting
Capacity:
|
350kg
(2 people including 1 in a wheel chair)
|
|
Car
Size:
|
1100mm
wide x 1400mm deep & 2000mm high
|
|
Frame:
|
Self
supporting lift shaft fabricated from Aluminium
|
|
Pit
Depth:
|
80mm
|
|
Doors:
|
A
standard ML3000 is fitted with a swing action Readicote door undercoated.
Other options are available for doors subject to the weather (metal
doors) or by owner's choice as long as the door complies with
the lift code. (The manufacturer reserves the right to approve
the type & style of door). Automatic door operators are available
on request.
|
|
|
All
doors are fitted with a concealed automatic door closer, full
length pull handle and a glass vision panel (optional).
|
|
Car
Fitout:
|
Fabricated
from a welded aluminium the car is lined with white colourbond
and trimmed with extruded aluminium moulding. Custom finishes
such as timber, MDF, and stainless steel are also available.
|
|
Stations:
|
Electrical
push button controls
|
|
|
Key
lockable to prevent unwanted users
|
|
Illuminated
indications |
|
Emergency
stop button |
|
Weatherproof
statins are available for external landing stations |
| Safety
features: |
Stainless
steel handrail |
|
Non
- slip floor covering indoor/outdoor carpet |
|
Emergency
Telephone Auto - dial |
|
Two
recessed down lights |
|
Key
lockable push button controls |
|
Emergency
stop button in the lift car |
|
Photo
electric sensors across the door entrance |
|
Back
up battery power for lighting & lowering of the car |
|
Emergency
lowering facility provided in the machine cabinet |
|
A
non-reversal timer of 5 seconds is fitted to allow the rider in
the car to open the landing door once the car has stopped without
the threat of the car being called by another operator. |
| Machine
Cabinet: |
Lockable
painted metal cabinet 600mm wide x 300mm deep x 1800mm high |
|
This
cabinet is to be located at the lower landing adjacent to the lift
shaft |
|
The
following is a list of the equipment housed in this cabinet: |
|
-
Electrical Main switch for the lift |
|
-
Power supply |
|
-
Cabinet light |
|
-
Pressure Pump |
|
-
Electrical control board |
|
-
Hydraulic control board |
|
-
Holding tank with level sight indicator |
|
-
Emergency Battery Back up with charger |
|
-
Emergency instructions & tools |
| Maintenance: |
We
recommend that the lift be serviced at no greater intervals than
12 months. This will keep the lift in a safe and serviceable condition. |
| Warranty: |
12
months on all parts and labour excluding misuse and/or malicious
damage. |
| Work
by others: |
Cladding
to shaft |
|
Telephone
cable to the lift shaft |
|
240w
power to be supplied to the Machine cabinet |
|
Concrete
pad for the lift |
