|
|
GOODSLIFTS
ISO-MAX
Capacity: 300 / 500 / 750 / 1000 kg
The ISO-MAX is a goods only lift with two fixed cabin areas of 1,00
x 1,40 m (capacity 300, 500, 750 and 1000 kg) or 1,275 x 1,50 m (Capacity
750 and 1000 kg) and a variable cabin height from 1,20 - 2,00 m.
Lift unit complies to EU-Directive for machines and has
a EU-Declaration of conformity of German TÜV Hanover / Sachsen-Anhalt
e.V.
Compared to a similar hydraulic freight elevator the ISO-MAX will offer
you some significant advantages and savings:
- corrosion-proof
- self-supporting galvanized steel structure
- shaft pit depth 270 mm only
- machine room less lift
- accessible spaces underneath the shaft possible
- easy mounting steel shaft cladding deliverable (no
fire protection)
- space saving installation - compact construction
- pre-assembled for easy installation
- no brick shaft necessary
Technical information
The information given below lists main features of our
goods lifts. Please do not hesitate to contact
us for further details.
Structure
- Steel structure, made of cold rolled galvanized
special profiles
- Buffer Ø 80/80
- Compensation device on suspension ropes
- Baffle plates
Cabin
Cant-off system made of galvanized steel, adjustable
guide shoes on both sides
Special safety gear (type tested)
Hinged doors
- manual operated hinged doors, made of galvanized steel
in accordance to DIN 18090, production controlled by TUV-authorities
- with side frames made of galvanized stell according
to drawing
- door locks type-tested by TUV-authorities
Machine room door
- double hinged door with sash lock
- with side frames made of galvanized steel according
to drawing
Drive Unit
- Drive unit with standard motor IP 54 disc brake and
hand wheel, 3 x 400 V/50 Hz
- 2 chain wheels for chains 5/8" x 3/8" suspension
2:1
Controller
- call and send control with 24V, safety circuit 230V
- pre-wired with plugs
- adjustable and time-limited despatch delay device
(1-5s)
- electronic overload contact
- acousting arrival signal
- position indicator on each entrance
- thermal motor protection as main switch pre-wired
on control panel
- machine room light with socket
SO-PM 1000
capacity: 1000kg
goods lift along directive 95/28/EG
with max. 2 persons
- corrosion-proof
- selft-supporting galvanized steel structure
- shaft pit depth 270mm only
- cabin push button with send control - landing push
buttons with call and send control
- machine room less lift
- accessible spaces underneath the shaft possible
- easy mounting steel shaft cladding deliverable (no
fire protection)
- reducing of interference prone by setting a safety
feature instead of cabin door
- space saving installation - compact construction
- pre-assembled for easy installation
- no brick shaft necessary
Technical information
The information given below lists main features of our
goods lifts. Please do not hesitate to contact us for further details.
Structure
- Steeel structure, made of cold rolled galvanized profiles
- Buffer 0 80/80
- Compensation device on suspension ropes
- Baffle plates
Cabin
- Cant-off system made of galvanized steel, adjustable
guide shoes on both sides
- safety light curtian
- cabin light - cabin ventilation
- type tested safety gear
- special pushbuttons in cabin - emergency call - emergency
light - prepare for outgoing emergency call
- special safety gear (type tested)
- special cabin apron (type tested)
Hinged doors
- Manual operated hinged doors, made of galvanized steel
in accordance to DIN 18090, production controlled by TUV-authorities
- With side frames made of galvanized steel according
to drawing
- Door locks type-tested by TUV-authorities
Maintenance room door
- Hinged door with sash lock
- With side frames made of galvanized steel
Drive unit
- Drive unit with standard motor IP 54 disc brake and
hand wheel, 3 x 400 V/50 Hz
- 2 chain wheels for chains 5/8" x 3/8 suspenion
2:1
Controller
- Call and send control
- Cabin push button with send control
- Landing push buttons with call and send control
- Micro-processor technique in controller cabinet
<top>
|
