Our Independence range does what it says - gives the
freedom to move about the house to those who otherwise might find, for
a variety of reasons, the place is simply getting beyond them. Occupying
a small space, reliable, safe and very cost-effective, the Independence
lifts helps the couple or individual extend the time they can stay in
their home. And isn't that what it's all about?
The Australian design is simple and commonsense, the
mechanics are robust and long-lasting, and the finish can be matched
with your décor. Simple and quick to install, the very flexible
Independence lift can be retro fitted to any home in days! It has a
manufacturing time of as little as six weeks.
Designed and manufactured in Australia for people with
limited mobility this lift offers an economical choice for domestic
use. To be installed externally the Gemini is manufactured to travel
approximately 3 metres in 45 seconds to 2 levels with a lifting capacity
of 250kg (2 people including 1 in a wheel chair) This lift is operated
by electrical push buttons. Telephone is included.
|
Manufactured
in:
|
Australia
by an Australian owned family company
|
|
Standard
Compliant:
|
AS1735
part 17
|
|
Application:
|
Residential
use only
|
|
Installation:
|
External
only
|
|
|
Crane
in or dismantle
|
|
|
The
lift complete with cladded tower of folded white colourbond panels.
|
|
Powered:
|
Water
Hydraulic with diret acting cylinders on each side of the lift
car
|
|
Travels:
|
2
levels
|
|
Speed:
|
Travel
3 metres in 45 seconds
|
|
Lifting
Capacity:
|
250kg
(2 people including 1 in a wheel chair)
|
|
Car
Size:
|
900mm
wide x 1300mm deep & 2000mm high
|
|
Frame:
|
Self
supporting lift shaft fabricated from Aluminium
|
|
Pit
Depth:
|
80mm
|
|
Doors:
|
The
Gemini is fitted with a swing action door. The door is constructed
with an aluminium frame sheeted with white colourbond to the internal
surface. The frame is left open on the external side. The door
is 1850mm high and 860mm wide. All doors are fitted with mechanical
electric interlock, an externally mounted fully adjustable automatic
door closer, full length pull handle and a mesh vision panel.
|
|
Car
Fitout:
|
Fabricated
with a welded aluminium frame and lined with white colourbond.
The lift car is not provided with a roof.
|
|
Stations:
|
Electrical
push button controls
|
|
|
Key
lockable to prevent unwanted users
|
|
Illuminated
indications |
|
Emergency
stop button |
|
Weatherproof
stations are available for external landing stations |
| Safety
features: |
Stainless
steel handrail |
|
Non
- slip floor covering indoor/outdoor carpet |
|
Emergency
Telephone |
|
Two
diachronic down lights |
|
Key
lockable push button controls |
|
Emergency
stop button in the lift car |
|
Photo
electric sensors across the door entrance |
|
Back
up battery power for lighting & lowering of the car |
|
Emergency
lowering facility provided in the machine cabinet |
|
A
non-reversal timer of 5 seconds is fitted to allow the rider in
the car to open the landing door once the car has stopped without
the threat of the car being called by another operator. |
| Machine
Cabinet: |
Lockable
painted metal cabinet 600mm wide x 300mm deep x 1800mm high |
|
This
cabinet is to be located at the lower landing adjacent to the lift
shaft |
|
The
following is a list of the equipment housed in this cabinet: |
|
-
Electrical Main switch for the lift |
|
-
Power supply |
|
-
Cabinet light |
|
-
Pressure Pump |
|
-
Electrical control board |
|
-
Hydraulic control board |
|
-
Holding tank with level sight indicator |
|
-
Emergency Battery Back up with charger |
|
-
Emergency instructions & tools |
| Maintenance: |
We
recommend that the lift be serviced at no greater intervals than
12 months. This will keep the lift in a safe and serviceable condition. |
| Warranty: |
12
months on all parts and labour excluding misuse and/or malicious
damage. |
| Work
by others: |
Telephone
cable to the lift shaft |
|
240w
power to be supplied to the Machine cabinet |
|
Concrete
pad for the lift |
