Our Independence range does what it says - gives the
freedom to move about the house to those who otherwise might find, for
a variety of reasons, the place is simply getting beyond them. Occupying
a small space, reliable, safe and very cost-effective, the Independence
lifts helps the couple or individual extend the time they can stay in
their home. And isn't that what it's all about?
The Australian design is simple and commonsense, the
mechanics are robust and long-lasting, and the finish can be matched
with your décor. Simple and quick to install, the very flexible
Independence lift can be retro fitted to any home in days! It has a
manufacturing time of as little as six weeks.
|
Manufactured
in:
|
Australia
by an Australian owned family company
|
|
Standard
Compliant:
|
AS1735
part 18
|
|
Application:
|
Residential
use only
|
|
Installation:
|
Internal
or external
|
|
|
Crane
in or dismantle
|
|
|
The
lift complete with tower can be fitted to an owner supplied shaft
or have sheeting attached directly to the tower. Cladding to be
in compliance with the lift code
|
|
Powered:
|
Oil
hydraulic with direct acting cylinders on each side of the lift
car
|
|
Travels:
|
3
levels
|
|
Speed:
|
Travel
4 metres in 20 seconds
|
|
Lifting
Capacity:
|
250kg
or 350kg(2-3 people including 1 in a wheel chair)
|
|
Car
Size:
|
900mm
wide x 1300mm deep & 2000mm high or 1100mm wide x 1400mm deep
& 2000mm high
|
|
Frame:
|
Self
supporting lift shaft fabricated from Aluminium
|
|
Pit
Depth:
|
80mm
|
|
Doors:
|
A
standard Endeavour is fitted with a swing action, Readicote door
undercoated. Other options are available for doors subject to
the weather (metal doors) or by owners choice as long as the door
complies with the lift code. (The manufacturer reserves the right
to approve the type & style of door). All doors are fitted
with a concealed automatic door closer, full length pull handle
and a glass vision panel (optional).
|
|
Car
Fitout:
|
Fabricated
from welded aluminium the car is lined with white colourbond and
trimmed with extruded aluminium moulding. Custom finishes such
as timber, MDF, and stainless still are also available.
|
|
Stations:
|
Electrical
push button controls
|
|
|
Key
lockable to prevent unwanted users
|
|
Illuminated
indications |
|
Emergency
stop button |
|
Weatherproof
stations are available for external landing stations |
| Safety
features: |
Stainless
steel handrail |
|
Non
- slip floor covering indoor/outdoor carpet |
|
Emergency
Telephone |
|
Two
recessed down lights |
|
Key
lockable push button controls |
|
Emergency
stop button in the lift car |
|
Photo
electric sensors across the door entrance |
|
Back
up battery power for lighting & lowering of the car |
|
Emergency
lowering facility provided in the machine cabinet |
|
A
non-reversal timer of 5 seconds is fitted to allow the rider in
the car to open the landing door once the car has stopped without
the threat of the car being called by another operator. |
| Machine
Cabinet: |
Lockable
painted metal cabinet 600mm wide x 300mm deep x 1800mm high |
|
This
cabinet is to be located at the lower landing adjacent to the lift
shaft |
|
The
following is a list of the equipment housed in this cabinet: |
|
-
Electrical Main switch for the lift |
|
-
Power supply |
|
-
Cabinet light |
|
-
Electrical control board |
|
-
Hydraulic control board |
|
-
Holding tank with level sight indicator |
|
-
Emergency Battery Back up with charger |
|
-
Emergency instructions & tools |
| Maintenance: |
We
recommend that the lift be serviced at no greater intervals than
12 months. This will keep the lift in a safe and serviceable condition. |
| Warranty: |
12
months on all parts and labour excluding misuse and/or malicious
damage. |
| Work
by others: |
Telephone
cable to the lift shaft |
|
Cladding
to shaft |
|
240w
power to be supplied to the Machine cabinet |
|
Concrete
pad for the lift |
