|
Manufactured in:
|
Australia by an Australian owned family company
|
|
Standard Compliant:
|
AS1735 part 17
|
|
Application:
|
Residential use only
|
|
Installation:
|
External only
|
|
Crane in or dismantle
|
|
The lift complete with cladded tower of folded white colourbond panels.
|
|
Powered:
|
Water Hydraulic with diret acting cylinders on each side of the lift car
|
|
Travels:
|
2 levels
|
|
Speed:
|
Travel 3 metres in 45 seconds
|
|
Lifting Capacity:
|
250kg (2 people including 1 in a wheel chair)
|
|
Car Size:
|
900mm wide x 1300mm deep & 2000mm high
|
|
Frame:
|
Self supporting lift shaft fabricated from Aluminium
|
|
Pit Depth:
|
80mm
|
|
Doors:
|
The Gemini is fitted with a swing action door. The door is constructed with an aluminium frame sheeted with white colourbond to the internal surface. The frame is left open on the external side. The door is 1850mm high and 860mm wide. All doors are fitted with mechanical electric interlock, an externally mounted fully adjustable automatic door closer, full length pull handle and a mesh vision panel.
|
|
Car Fitout:
|
Fabricated with a welded aluminium frame and lined with white colourbond. The lift car is not provided with a roof.
|
|
Stations:
|
Electrical push button controls
|
|
Key lockable to prevent unwanted users
|
|
Illuminated indications
|
|
Emergency stop button
|
|
Weatherproof stations are available for external landing stations
|
|
Safety features:
|
Stainless steel handrail
|
|
Non - slip floor covering indoor/outdoor carpet
|
|
Emergency Telephone
|
|
Two diachronic down lights
|
|
Key lockable push button controls
|
|
Emergency stop button in the lift car
|
|
Photo electric sensors across the door entrance
|
|
Back up battery power for lighting & lowering of the car
|
|
Emergency lowering facility provided in the machine cabinet
|
|
A non-reversal timer of 5 seconds is fitted to allow the rider in the car to open the landing door once the car has stopped without the threat of the car being called by another operator.
|
|
Machine Cabinet:
|
Lockable painted metal cabinet 600mm wide x 300mm deep x 1800mm high
|
|
This cabinet is to be located at the lower landing adjacent to the lift shaft
|
|
The following is a list of the equipment housed in this cabinet:
|
|
- Electrical Main switch for the lift
|
|
- Power supply
|
|
- Cabinet light
|
|
- Pressure Pump
|
|
- Electrical control board
|
|
- Hydraulic control board
|
|
- Holding tank with level sight indicator
|
|
- Emergency Battery Back up with charger
|
|
- Emergency instructions & tools
|
|
Maintenance:
|
We recommend that the lift be serviced at no greater intervals than 12 months. This will keep the lift in a safe and serviceable condition.
|
|
Warranty:
|
12 months on all parts and labour excluding misuse and/or malicious damage.
|
|
Work by others:
|
Telephone cable to the lift shaft
|
|
240w power to be supplied to the Machine cabinet
|
|
Concrete pad for the lift
|
