Southern Lifts are pleased to now offer a powered pool lift, manufactured by an Italian company, Digi Project.

This pool lift has been developed for providing solutions for wheelchair users to gain access to swimming pools.

The Pandect is a safe, economical and low cost solution, to overcome accessibility barriers into buildings. The Pandect Low Rise Platform Lift is suitable for both indoor and outdoor use and will use much less space than a ramp.

Designed for commercial applications where a lift is required for disabled access over multiple levels or where space and headroom are limited.

Awareness of access for people with disabilities is an important social issue. Discrimination can no longer be tolerated. Under Government legislation, every new building must have disabled access facilities, with older public buildings required to upgrade and install facilities.
Wheelchair Access Platform Lifts are the solution.

The ML3000 is designed and manufactured in Australia. The ML3000 is suitable for commercial or residential use. It can either be installed internally or externally. The lift is BCA E.3.6 compliant to include 1100mm x 1400mm car size, Braille & tactile, light curtain sensors and dual car controls. The ML3000 is able to travel 3 metres per 30 seconds to a maximum height of 4 metres with a lifting capacity of 350kg (2 people including 1 in a wheel chair).

The lift is oil hydraulic power with direct acting cylinders on each side of the car. Fabricated from aluminium the lift tower can be fitted into a shaft or sheeted direct to reduce installation time and cost.

The "Apollo" Independence Lift

The Apollo is designed and manufactured in Australia. For residential use this lift can either be installed internal or external. The Apollo is able to travel 3 meters in 30 seconds to 2 levels with a lifting capacity of 250kg. (2 people including 1 in a wheel chair). This lift is operated by electrical push buttons. Telephone is included.

The lift is water driven power with direct acting cylinders on each side of the car. Fabricated from aluminium the lift tower can be fitted into a shaft or sheeted direct to reduce installation time and cost. This lift is the builder/owners dream, it can be installed in 2 days!

The "Gemini" Independence Lift……

Designed and manufactured in Australia for people with limited mobility this lift offers an economical choice for domestic use. To be installed externally the Gemini is manufactured to travel approximately 3 metres in 45 seconds to 2 levels with a lifting capacity of 250kg (2 people including 1 in a wheel chair) This lift is operated by electrical push buttons. Telephone is included.

The lift is water driven power with direct acting cylinders on each side of the car. Fabricated from aluminium it has the added bonus of external cladding using folded colourbond sections.

We believe that the Gemini is the most cost effective lift on the market and it can go outdoors!