Our Independence range does what it says - gives the
freedom to move about the house to those who otherwise might find, for
a variety of reasons, the place is simply getting beyond them. Occupying
a small space, reliable, safe and very cost-effective, the Independence
lifts helps the couple or individual extend the time they can stay in
their home. And isn't that what it's all about?
The Australian design is simple and commonsense, the
mechanics are robust and long-lasting, and the finish can be matched
with your décor. Simple and quick to install, the very flexible
Independence lift can be retro fitted to any home in days! It has a
manufacturing time of as little as six weeks.
The "Apollo" Independence Lift…..
The Apollo is designed and manufactured in Australia.
For residential use this lift can either be installed internal or external.
The Apollo is able to travel 3 meters in 30 seconds to 2 levels with
a lifting capacity of 250kg. (2 people including 1 in a wheel chair).
This lift is operated by electrical push buttons. Telephone is included.
The lift is water driven power with direct acting cylinders
on each side of the car. Fabricated from aluminium the lift tower can
be fitted into a shaft or sheeted direct to reduce installation time
and cost. This lift is the builder/owners dream, it can be installed
in 2 days!
|
Manufactured
in:
|
Australia
by an Australian owned family company
|
|
Standard
Compliant:
|
AS1735
part 17
|
|
Application:
|
Residential
use only
|
|
Installation:
|
Internal
or external
|
|
|
Crane
in or dismantle
|
|
|
The
lift complete with tower can be fitted to an ower supplied shaft
or have sheeting attached directly to the tower. Cladding to be
in compliance with the lift code.
|
|
Powered:
|
Water
Hydraulic with diret acting cylinders on each side of the lift
car
|
|
Travels:
|
2
levels
|
|
Speed:
|
Travel
3 metres in 30 seconds
|
|
Lifting
Capacity:
|
250kg
(2 people including 1 in a wheel chair)
|
|
Car
Size:
|
900mm
wide x 1300mm deep & 2000mm high
|
|
Frame:
|
Self
supporting lift shaft fabricated from Aluminium
|
|
Pit
Depth:
|
80mm
|
|
Doors:
|
A
standard Apollo is fitted with a swing action Readicote door undercoated.
Other options are available for doors subject to the weather (metal
doors) or by owner's choice as long as the door complies with
the right to approve the type & style of door)
|
|
|
All
doors are fitted with a concealed automatic door closer, full
length pull handle and a glass vision panel (optional).
|
|
Car
Fitout:
|
Fabricated
from a welded aluminium the car is lined with white colourbond
and trimmed with extruded aluminium moulding. Custom finishes
such as timber, MDF, and stainless steel are also available.
|
|
Stations:
|
Electrical
push button controls
|
|
|
Key
lockable to prevent unwanted users
|
|
Illuminated
indications |
|
Emergency
stop button |
|
Weatherproof
statins are available for external landing stations |
| Safety
features: |
Stainless
steel handrail |
|
Non
- slip floor covering indoor/outdoor carpet |
|
Emergency
Telephone |
|
Two
recessed down lights |
|
Key
lockable push button controls |
|
Emergency
stop button in the lift car |
|
Photo
electric sensors across the door entrance |
|
Back
up battery power for lighting & lowering of the car |
|
Emergency
lowering facility provided in the machine cabinet |
|
A
non-reversal timer of 5 seconds is fitted to allow the rider in
the car to open the landing door once the car has stopped without
the threat of the car being called by another operator. |
| Machine
Cabinet: |
Lockable
painted metal cabinet 600mm wide x 300mm deep x 1800mm high |
|
This
cabinet is to be located at the lower landing adjacent to the lift
shaft |
|
The
following is a list of the equipment housed in this cabinet: |
|
-
Electrical Main switch for the lift |
|
-
Power supply |
|
-
Cabinet light |
|
-
Pressure Pump |
|
-
Electrical control board |
|
-
Hydraulic control board |
|
-
Holding tank with level sight indicator |
|
-
Emergency Battery Back up with charger |
|
-
Emergency instructions & tools |
| Maintenance: |
We
recommend that the lift be serviced at no greater intervals than
12 months. This will keep the lift in a safe and serviceable condition. |
| Warranty: |
12
months on all parts and labour excluding misuse and/or malicious
damage. |
| Work
by others: |
Cladding
to shaft |
|
Telephone
cable to the lift shaft |
|
240w
power to be supplied to the Machine cabinet |
|
Concrete
pad for the lift |
